The valve bag packaging machine is an automatic packaging machine designed for various fine powder or ultrafine powder materials with low bulk density, strong air affinity, and excellent or poor self-flow.
The working principle of valve bag packaging machine:
1. The valve bag packaging machine uses the motor as the power source to drive the impeller in the discharge seat to rotate smoothly to achieve uniform feeding;
2. The sensor measures the weight of the material in the bag and inputs the measurement signal into the microcomputer. When the filling weight requirement is met, the microcomputer outputs the signal, and the sealing cylinder extends into the working state to seal the discharge port;
3. At the same time, the pull rod of the electromagnet moves up, and the material bag falls, so as to realize quantitative and rapid packaging of loose materials;
4. The material enters the dividing wheel from the outer silo, and enters the ash hopper from the feed port on the machine base. The material is evenly sent to the discharge port through the smooth rotation of the impeller, insert the packaging bag, and lightly touch the travel switch on the right side of the feed nozzle. Sealed cylinder shrinks;
5. The discharge nozzle is unobstructed, the filling starts, and the material falls into the bag smoothly;
6. With the increase of materials in the bag, the signal input by the sensor to the microcomputer is also constantly changing. When the weight of the material reaches the set requirement, the microcomputer outputs a signal, the sealing cylinder extends to seal the discharge port, and at the same time the electromagnet pulls the rod. Move, the material bag falls, so as to achieve the automatic packaging requirements of automatic measurement and automatic bag drop.
The above is the whole introduction of the working principle of the valve bag packaging machine. If you have any questions during use, please feel free to consult us.